More unique IPs than any network on the planet, in the world's largest residential pool. That's Shifter.More unique IPs than any network, in the world's largest pool. That's Shifter.

See the numbers

DataImpulse vs Geonode

DataImpulse vs Geonode: Proxy Comparison

This page compares DataImpulse, a pay-as-you-go network suited to small, occasional jobs, with Geonode, a per-GB and subscription network suited to long single-IP sessions, on identical requests.

16 figures compared · updated 57 mins ago
DataImpulse vs Geonode
Live
DataImpulse logo DataImpulse vs Geonode logo Geonode
  1. 80.1 Atlas Score 80.3
  2. 6.3/10 Success 9.5/10
  3. 471 ms Latency p50 810 ms
  4. 881K Unique IPs 3.29M
  5. 204 Countries 223
  6. $4.45 $ / 1k successes $3.30
  • Same requests
  • Same targets
  • No paid placement
  • Gaps shown, never filled
01 · Verdict

DataImpulse vs Geonode: the verdict

DataImpulse puts pay-per-use first and Geonode puts long session hold first; the verdict shows each Atlas Score and the rows each one takes.

DataImpulse leads on 3 16 figures compared Geonode leads on 13
DataImpulse logo

DataImpulse

#6
Atlas Score 80.1 A

Choose DataImpulse to

  • Speed up each round trip
  • Look less like a bot
  • Pull more product listings
Geonode logo

Geonode

#5
Atlas Score 80.3 A

Choose Geonode to

  • Exclusive IPs
  • Give each task its own IP
  • Rotate across more carriers
Next · 02 Side by side How do they compare on every figure?
02 · Side by side

DataImpulse and Geonode side by side

Green marks the leader of each row as the pay-as-you-go approach of DataImpulse meets the sticky-session approach of Geonode.

DataImpulse and Geonode compared on every measured figure
Metric
Verdict
Atlas Score 80.1 80.1 80.1 80.3 80.3 80.3
Rank #6 #6 #6 #5 #5 #5
Performance
Success 9.5/10 6.3/10 6.3/10 9.3/10 9.5/10 9.5/10
Latency p50 480 ms 471 ms 471 ms 824 ms 810 ms 810 ms
Challenge score 8.0/10 6.5/10 6.5/10 4.6/10 5.1/10 5.1/10
Requests 1.38M 5.00M 5.00M 2.01M 6.72M 6.72M
Availability 99.79% 99.73% 99.73% 100.00% 99.95% 99.95%
Weighted degradation 3 min 10 min 10 min 0 min 2 min 2 min
Pool
Unique IPs 396K 881K 881K 1.05M 3.29M 3.29M
Countries 197 204 204 219 223 223
Regions 2.1K 2.4K 2.4K 2.4K 2.6K 2.6K
Cities 32K 43K 43K 42K 56K 56K
ASNs 7.7K 9.9K 9.9K 15K 18K 18K
Trust
DC ASN share 0.02% 0.03% 0.03% 0.03% 0.03% 0.03%
Exclusive IPs 170K 298K 298K 578K 1.42M 1.42M
Likely upstream None found None found None found None found None found None found
Peer consent disclosed No No No Yes Yes Yes
Cost
$ / GB $0.80 $0.80 $0.80 $0.59 $0.59 $0.59
Cost per 1,000 successes $4.45 $4.45 $4.45 $3.30 $3.30 $3.30
Trial No trial No trial No trial Visit site Paid trial Paid trial Paid trial $5.00 · 10 GB · 3 days Start trial

Best third of all networks Middle third Bottom third Not measured yet

Next · 03 By target Which works better on the sites you use?
03 · By target

How DataImpulse and Geonode do per site

Target by target, the results that decide whether DataImpulse suits small, occasional jobs and Geonode suits long single-IP sessions.

DataImpulse Geonode
  1. 7.4/10 HTTP 6.3/10
  2. 7.4/10 HTTPS 5.8/10
  3. 4.9/10 Marketplace 1.6/10
  4. Not measured Search 1.6/10
  5. 2.3/10 Profile Not measured
  6. 10.0/10 Social 5.5/10
  7. 4.5/10 Challenge 4.5/10
  8. 6.0/10 AI 3.6/10
  1. 5.2/10 HTTP 7.4/10
  2. 6.8/10 HTTPS 6.3/10
  3. 4.2/10 Marketplace 1.5/10
  4. 2.1/10 Search 1.0/10
  5. 2.3/10 Profile 3.1/10
  6. 10.0/10 Social 7.4/10
  7. 5.5/10 Challenge 5.5/10
  8. 5.2/10 AI 3.1/10
  1. 5.2/10 HTTP 7.4/10
  2. 6.8/10 HTTPS 6.3/10
  3. 4.2/10 Marketplace 1.5/10
  4. 2.1/10 Search 1.0/10
  5. 2.3/10 Profile 3.1/10
  6. 10.0/10 Social 7.4/10
  7. 5.5/10 Challenge 5.5/10
  8. 5.2/10 AI 3.1/10

What each target tests, and why it is hard: the target suite

Next · 04 Price Which is cheaper, DataImpulse or Geonode?
04 · Price

What DataImpulse and Geonode really cost

DataImpulse sells pay-as-you-go traffic, Geonode sells per-GB traffic and subscriptions; here are both rate cards, the cost per success and the bill at volume.

DataImpulse logo DataImpulse

  • Rate card

    $0.80 to $1.00

    per GB

  • $ / 1k successes

    $4.45

    $4.45

    $4.45

  • Trial

    No trial

Geonode logo Geonode

  • Rate card

    $0.27 to $0.88

    per GB

  • $ / 1k successes

    $3.30

    $3.30

    $3.30

  • Trial

    Paid trial

    $5.00 · 10 GB · 3 days

The bill for successful requests

What DataImpulse and Geonode bill for a fixed number of successful requests
Successful requests DataImpulseGeonode
10,000 $45$33
100,000 $445$330
1,000,000 $4,450$3,302
10,000,000 $44,503$33,025
10,000 $45$33
100,000 $445$330
1,000,000 $4,450$3,302
10,000,000 $44,503$33,025
10,000 $45$33
100,000 $445$330
1,000,000 $4,450$3,302
10,000,000 $44,503$33,025
Successful requests only, for the target and time window picked, at each network's 200 GB plan price, retries included. A minimum monthly spend is not added: see the network's page.

Every measured network priced the same way: the true cost of residential proxies

Next · 05 IP pool Which has the better IP pool?
05 · IP pool

Inside the pools, DataImpulse vs Geonode

DataImpulse adds a premium pool for harder targets, while Geonode sells sessions that keep one IP for long; below, the IPs each handed out and how many turned up on both.

DataImpulse Geonode
  1. 396K Unique IPs 1.05M
  2. 197 Countries 219
  3. 32K Cities 42K
  4. 7.7K ASNs 15K
  5. 0.0% Datacenter ASN share 0.0%
  1. 881K Unique IPs 3.29M
  2. 204 Countries 223
  3. 43K Cities 56K
  4. 9.9K ASNs 18K
  5. 0.0% Datacenter ASN share 0.0%
  1. 881K Unique IPs 3.29M
  2. 204 Countries 223
  3. 43K Cities 56K
  4. 9.9K ASNs 18K
  5. 0.0% Datacenter ASN share 0.0%

IPs seen on both DataImpulse and Geonode

0

No IPs were seen on both pools in this window.

0

No IPs were seen on both pools in this window.

0

No IPs were seen on both pools in this window.

How pool overlap is measured
Next · 06 Guide How do you choose between DataImpulse and Geonode?
06 · Guide

Choosing DataImpulse or Geonode

Getting going differs, since DataImpulse lets you start small and Geonode starts with per-GB or a subscription; below is what to compare and how to test.

Checklist

What to compare between DataImpulse and Geonode

Success on the sites you scrape

Check DataImpulse and Geonode on the exact targets you collect from, since what serves small teams with occasional jobs may differ from what serves buyers who need long sessions.

Cost per successful request

Cost per successful request levels the field between pay-as-you-go traffic at DataImpulse and per-GB traffic and subscriptions at Geonode, since a low per-GB rate can still mean a high bill per result.

Unique IPs, not the advertised pool

Look at DataImpulse as a network for pay-as-you-go buyers and at Geonode as a name for long sticky sessions, then at the number that matters for pool size: distinct IPs actually handed out.

How residential each pool is

The table flags how residential each pool looks, a key check when DataImpulse is built around small jobs, Geonode is built around long sticky sessions, and sites block hosting addresses.

Coverage where you need it

DataImpulse adds a premium pool for harder targets and Geonode sells sessions that keep one IP for long; check that both cover the countries, cities and ASNs your work needs.

How the IPs are sourced

DataImpulse is a lean provider billed by usage, Geonode is a provider known for long sessions, and both sell residential IPs, so check peer consent and customer verification in the side by side table.

Related reading: What to test in a proxy free trial

How DataImpulse and Geonode were compared

Same requests, same targets

Size and history aside, a network for pay-as-you-go buyers and a name for long sticky sessions got identical treatment: DataImpulse and Geonode ran the same requests to the same targets.

Read the full methodology, or download the dataset.

  • Same requests to the same targets
  • Same schedule and measurement window
  • Published formula for the Atlas Score
  • Gaps shown as Not measured, never filled

Test DataImpulse and Geonode on your own targets

DataImpulse lets you start small and Geonode starts with per-GB or a subscription; either way, run both on your targets, price by successful requests, and move traffic in stages. What to test in a proxy free trial

FAQ

Frequently asked questions

Quick answers on DataImpulse and Geonode, read with their pay-as-you-go and sticky-session labels in mind.

On Atlas Score, Geonode comes first with 80.3 against 80.1, but the rows are split: DataImpulse leads 3 of the 16 shared figures and Geonode leads 13.

Per successful request, Geonode is cheaper: $3.30 per 1,000 successful requests against $4.45, with failed requests counted in.

By median latency, DataImpulse answers sooner: 471 ms against 810 ms.

On success across all targets, Geonode comes out ahead: 9.5/10 against 6.3/10.

Geonode handed out more distinct IPs: 3,286,685 against 880,984.

No IPs were seen on both, so the pools of DataImpulse and Geonode look separate.

They serve different buyers: DataImpulse small teams with occasional jobs, Geonode buyers who need long sessions. DataImpulse is built around small jobs and Geonode is built around long sticky sessions; the tables above compare the results.

Most code works unchanged: point it at the gateway of Geonode, noting that Geonode lets you pay per GB or subscribe where DataImpulse charges only for traffic used. Then test Geonode, minding the choice between per-GB and subscription and the extra cost of the premium pool.

Get started

Test both on your own targets

DataImpulse puts pay-per-use first and Geonode puts long session hold first; send each some real traffic and let the cost per result decide.

3-day money-back guarantee. Cancel anytime.